SMART Clamps (XP10 Gen 1)

$26.99

Mini SMART Clamps for the Micro-Start XP-10 (Gen 1 model). All-copper construction with strong clamping force and power transfer. Features 5 built-in protections to safely jump-start vehicles.

In stock

UPC: 639713373059 SKU: AG-MSA-11SCX Category: Tag:
Description

SMART CLAMPS

Replacement jump starter clamps for use with the Micro-Start XP-10 (Gen 1) only. These SMART Clamps are an upgrade from the original design included with the XP-10 kit. These have an all-copper construction with larger clamp (4″) and stronger clamping strength for good contact with the vehicle terminals. They also feature 5 built-in safety protections.

Reverse-Polarity Protection built into Clamps

1. REVERSE POLARITY PROTECTION

Protects from connecting the Smart Clamps in reverse polarity. The clamps will not allow User to Jump Start and will Notify User with RED LED Flashing.

Short-Circuit Protection built into Clamps

2. SHORT CIRCUIT PROTECTION

If the Smart Clamps touch or are connected together accidentally the clamps will disconnect immediately and not allow Short-Circuit.

CAUTION

If the BOOST BUTTON is pressed this will BYPASS the safety features of the Smart Clamps. Use CAUTION and make certain Clamps are connected correctly at Battery Terminals BEFORE pressing Boost Button.

Reverse-Current Protection built into Clamps

3. REVERSE CURRENT PROTECTION

If the clamps are left on the vehicle, the Reverse Current protection will not allow a Back-Charging into the MICRO-START. In any case we still suggest never leaving the unit connected to a vehicle more than 30 seconds after a Start.

Over-Current Protection built into Clamps

4. OVER CURRENT PROTECTION

If the Current exceeds 600 amps the Smart Clamps will shut down automatically protecting the unit from damage.

Over-Discharge Protection Clamps

5. OVER DISCHARGE PROTECTION

When the output voltage of the MICRO-START is less than 10 Volts the clamps will not allow jump starting or further amperage discharge from the clamps.

INCLUDES

  • 1pc SMART CLAMPS (replacement for use with the MICRO-START XP-10).

 

COMPATIBLE WITH:

  • XP-10 (Gen 1 model)

JUMPER CLAMPS TIP DIFFERENCE:

Please refer to the images below to see how the tips (that plug into jump port) differ between the Smart Clamps. The XP-10 (Gen 1) clamps connector tip is curved. The Old/Original XP-1 and XP-3 clamps tips are an EC5 connector. The XP-1 (Gen 1) and current XP-3 models have thermal protection and you can see the pin hole in its clamps connector tip.

XP10 Harness Connector Tip

XP-10 (Gen 1) Only

SPORT, XP5, Old XP1, Old XP3 Harness Connector Tip

SPORT, Older XP-3 & XP-1

New XP1, New XP3 Harness Connector Tip

XP-3 & XP-1 (Gen 1)

SAFETY NOTES:

  1. The MICRO-START is for Jump-Starting ONLY through the Jump-Start port!
  2. Never leave the Micro-Start connected to your vehicle’s battery for longer than 30 seconds, or use in place of your regular battery in your vehicle.
  3. Do not try to charge the Micro-Start directly from your battery through the jump start port. Severe damage can result!

Proposition 65 Warning

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Additional information
Weight 0.5 lbs
Dimensions 8 × 3 × 2 in
Product Size

4″ (clamp length), 15" (end to end)

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.