XP10 Clampless Starting Harness Accessory

16″ Clampless Starting Harness (XP10, XP10-HD)

4.75 out of 5 based on 4 customer ratings
(4 customer reviews)

$18.99

Clampless Starting Harness that connects directly to battery so you can easily jump-start your vehicle. Saves time with no need for clamps or removing the seat on your motorcycle.

  • 16 inches long.
  • Works with XP-10 or XP-10-HD Micro-Starts.
  • Ring terminals connect directly to your battery.
  • Other end can plug into the Micro-Start’s jumpstart port.

In stock

SKU: AG-MSA-10B Categories: , Tags: ,
Description

CLAMPLESS STARTING HARNESS

Accessory for Micro-Start XP-10 or XP-10-HD

The MICRO-START Clampless Harness was made so that a rider or driver can easily jump-start their vehicle using just their Micro-Start without the need for the jumper clamps, or having to remove the seat on your motorcycle. It is a 16-inch harness that connects directly to the battery with ring terminals while the other end can plug directly into the Micro-Start’s jumpstart port. It adds convenience and saves time if the situation arises when you have to jump start your vehicle. Simply connect the Micro-Start directly to this harness and jump-start your vehicle. No need to get out your Micro-Start clamps!

MSA-10B
COMPATIBLE WITH
  • XP-10
  • XP-10-HD

XP-10 Micro-Start Power Supply & Jump-Starter   xp-10 Heavy Duty Micro-Start Power Supply (PPS)

TIP DIFFERENCE

Please refer to the images below to see how the tips differ between the Starting Harnesses. The XP-10 harness connector is curved. The Old XP-3 and XP-1 harness tips are an EC5 connector. The New XP-3 and XP-1 have thermal protection and you can see the pin hole in its connector tip.

XP10 Harness Connector Tip

XP-10 & XP-10-HD

SPORT, XP5, Old XP1, Old XP3 Harness Connector Tip

SPORT, OLD XP-3 & XP-1

New XP1, New XP3 Harness Connector Tip

NEW XP-3 & XP-1

SAFETY NOTES:

  1. The MICRO-START is for Jump-Starting ONLY through the Jump-Start port!
  2. Never leave the Micro-Start connected to your vehicle’s battery for longer than 30 seconds, or use in place of your regular battery in your vehicle.
  3. Use only the provided chargers in the Micro-Start’s kit to charge the Micro-Start.

Proposition 65 Warning

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Additional Information
Weight 1 lbs
Dimensions 2 x 3 x 8 in
Product Size

16 inches

Reviews (4)

4 reviews for 16″ Clampless Starting Harness (XP10, XP10-HD)

  1. 5 out of 5

    :

    These will start your vehicle without any hesitation, as I noticed a little with the supplied clamps. I mainly just like the easy access cause the battery on my Harley is difficult to get to under the seat.

  2. 4 out of 5

    :

    This fits the XP-10. Easy install

  3. 5 out of 5

    :

    All my purchases from AntiGraivty have been topnotch. The quality of the battery harness is great and should be a great addition to the safety equipment I carry on my bike.

  4. 5 out of 5

    :

    My rating is as much for the product as it is for customer service I received when my delivery truck had a thief following it. I learned of the XP when my RV wouldn’t start & conventional cables couldn’t reach the battery due to distance the cables needed to reach. A second responding vehicle produced the Micro Start XP-10 & fired my rig right up. The XP is now standard equipment carry and overtime I see a tow truck jump starting a dead battery I let the owner know of this ‘little jumper’.

Only logged in customers who have purchased this product may leave a review.